LSP Low Pressure Hydraulic Work Support Cylinder(LSP-12)

Compact in size, suitable for installation on smaller fixtures in limited spaces.

Part-No.: LSP-12A-Spring-Extend Type. LSP-12B-Hydraulic-Extend TypeSP-12B。

This low-pressure support cylinder is used in mechanical processing to provide support force, reducing vibration, absorbing cutting forces, and preventing displacement, aiming to improve machining precision and quality.

The LSP-10 and LSP-12 bolt-type support cylinders have a small volume, making them suitable for arrangement in smaller spaces or for supporting workpieces with uneven heights.

This support cylinder provides strong support force and can replace various specifications of similar cylinders, making it convenient for fixture design and selection, thus saving costs.

The maximum operating pressure should not exceed 70 bar; exceeding this limit may cause permanent damage to the internal structure, leading to malfunction.

The product is available in two types, A and B:Type A is a spring-extend type, where the initial position of the shaft is the highest extended position. When the workpiece contacts the downward shaft for positioning, filling the oil will tighten the shaft to generate supporting force.。Type B is a hydraulic-extend type, where the initial position of the shaft is the lowest. After positioning the workpiece, supplying oil will extend the shaft to contact the workpiece and then stop, tightening the shaft to generate supporting force.